Skip to content
Buy Online, Pick Up In Store, Contactless Curbside Pickup Available!
Buy Online, Pick Up In Store, Contactless Curbside Pickup Available!

Dangerous Music MONITOR ST Monitor Controller with Remote Control - Open Box

Sale
Original price $2,199.00
Current price $1,869.95
SKU DANGMNTRST
Open Box/ B-Stock

The Dangerous Music Stereo MONITOR ST Control System with Remote Control is a 1 unit rack mountable device designed by mastering engineers for monitoring your mix in a studio setting. The device features four switchable analog input sources (-10 dBv or +4 dBu) and three sets of speaker outputs with independent subwoofer control and low pass filtering.

You can program input gain offsets to adjust the device's inputs for different sources. You can also independently adjust and store the subwoofer's level and decide which sets of speakers it will play with. Input 4 has a continuously variable level offset so you can compensate for a commercially mastered CD and carry out true A/B comparisons between your mix and a finished track.

A stereo auxiliary input allows you to layer additional elements on top of your mix such as a voice over when doing work for post production. A talkback microphone with built-in microphone and optional remote circuit gives you the choice of sending the talkback signal to an external cue or to open air speakers. An onboard cue power amplifier provides 40W of power. For headphone monitoring, the unit also includes a 20W headphone amplifier with independent volume control.

Functions such as solo, mono, mute, dim, source selection, speaker selection, and setting recall are controlled by the included remote control, which connects to the device over Ethernet CAT 5e cable. An analog stepped attenuator volume control on the remote provides precise and repeatable adjustments to the overall output level. The unit can be expanded for surround sound operation by connecting the optional MONITOR SR system.

Front Panel

Headphone Monitoring

Provides 20W per channel of high headroom headphone amplification

Remote Microphone Input

Allows you to use an external microphone for talkback

Talkback Microphone

Injects the communication microphone into the headphone cue system

Main to Cue

Sends the selected control room main audio to the cue amplifier and the phones outputs

Aux Input to Cue - to Main

Sends the auxiliary input to speakers, cue, or both so you can have a separate talent cue mix from the main headphone mix

Input 4 Level

Turns down the level on input 4 as needed so you can compare the current mix's output level to that of a mastered CD

Rear Panel

Auxiliary Input

Provides a separate stereo input with a separate path so you can layer an additional element such as a voice over on the control room mix

Analog Input and Output

Connects inputs and outputs through a 25-pin D-Sub connector

DC In

Provides power from external power supply which helps reduce the amount of heat in the monitoring unit

TB Remote

Produces remote talkback switch

Slate

Provides a signal path for the talkback microphone output so it can be played through open-air speakers or an external cue system

Cue Amp Out

Sends the headphone mix to a remote headphone box, allowing the 20W per channel to be distributed to up to 16 pairs of headphones

Remote

Connects to the monitor by Ethernet CAT 5e shielded cable in up to a 100' run. The remote controls all major functions of the monitor

Design

DC Coupled

Constructed without transformers or filters caps that would smear the stereo image. Instead the device is built with large voltage rails and Mogami point to point wiring

Mastering Grade Components

Designed and built to mastering standards to improve imaging, headroom, detail, and punch

Expandable

Can be combined with a MONITOR SR for surround sound operation and selected source line output for metering