New Fredenstein Bento 6S With 4 Radial Engineering Blank Panels
The Fredenstein Bento 6S is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards. Accepting a maximum of 6 modules, the Bento 6 features several important upgrades compared with third party products: Universal power supply with voltage range from 90V AC to 240V AC, 50 to 60 Hz., increased output currents of +/-16V DC 1.6A and +48V DC 0.15A, 533mA per slot (about 3 times more than the standard calls for).
The Bento 6S power supply is also designed for extremely low noise with state of the art switching regulators that operate above 200 kHz. They also follow “green” guidelines that minimize power consumption to only what is needed.
Other features include the capability to drive very large capacitive loads, others might oscillate if presented with large capacitors to charge. The Bento 6S ramps up in a controlled manner (typically 0.2 seconds) and unlike most, both the +16V and -16V are regulated separately, auxiliary audio inputs and outputs and built-in audio routing where modules can be simply daisy-chained, compressor buss linking, and from the back- panel, and a multi-Layer backplane for increased signal integrity and lower noise floor.